Adaptors

The Right Choice for a Clear Connection

Adapters

Adapter for GARMIN WAAS Upgrades - DBFTMA-90

As part of existing GNS430 and GNS530 upgrades to WAAS the antenna needs to be changed.

The new antenna requires a TNC connector whereas the old antenna used a BNC. The choice is either to change the connector or use adapters.

Changing the connector is not always practical due to useable cable lengths and/or location. The alternative is using a BNC to TNC adapter, ideally with a right angle.

The DBFTMA-90 is just the adapter for the job. It has a high quality precision nickel body construction with a gold plated center conductor. It has a 50 ohm impedance, dielectric withstanding voltage in excess of 1,500V RMS, and a minimum insulation resistance of 5k ohm.

DBA-600 BNC Tray Connector

Using the Deklin Technologies DBA-600 BNC Tray Connector in place of the solder type tray connector will save precious time during installation and also troubleshooting.

Designed to fit Bendix/King Silvercrown and other trays that currently use the solder type connector, the DBA-600 is made with high quality precision nickel body and a Gold plated center conductor.